Epson EPL-7000 User Manual - Page 180

Printing Problems Problem The ONLINE light is off- The printer stops printing and the display reads PAPER OUT or TONER OUT. The printout is not what you expect. The font you selected with software commands cannot be printed. Characters not belonging to the selected symbol set are being printed. Solution The printer is off line. Press the ON LINE button once to set the printer on line (the ON LINE light comes on). Replace the component specified. See Chapter 4 for paper loading instructions. See Chapter 6 for imaging cartridge replacement instructions. After replacing the component, close the printer. The correct orientation (portrait or landscape) may not be selected. Make sure that the orientation (portrait or landscape) matches the selected font. The correct font is not selected if the font does not contain the selected orientation. The font you selected with your software may not be available. Be sure you have installed the correct font card or cartridge. The expected symbol set may not be available in the printer. Be sure you have installed the correct font card or cartridge. The correct symbol set may not be selected. Specify the desired symbol set (containing international characters or symbols) with your software or with SelecType. Available symbol sets in SelecType vary depending on the selected printer mode. See Chapter 3 or Appendix C for more information. Troubleshooting 7-23