Epson EPL-7000 User Manual - Page 77
main menu., to set the new mode. The display returns to
View all Epson EPL-7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Selecting Channel and Mode 4. If you want to change the channel, press or . If you do not, press Then you move to a submenu, MODE. The current setting for HP emulation mode is shown on the display: 5. Press to enter the MODE option. The icon appears to the left of the currently set printer mode as shown below. 6. You can choose either the L-JET2P, LQ, or FX mode. Press either or until the mode you want to select appears on the display. 7. Press to set the new mode. The display returns to the main menu. 8. Press the SelecType button to exit SelecType. This mode setting remains in effect until you change the setting again or turn off the printer. If you want this setting to remain in effect even after you turn the printer off and back on, use the P-CONFIG option to save the setting as described later in this chapter. 3-14 SelecType