Epson EPL-7000 User Manual - Page 71

Using SelecType Select channel If you have connected computers to both interfaces and set the MEMORY SHARE option, whenever you enter SelecType Level 1, the display shows the channel select option, as shown below. If you have not set up both interfaces, SelecType skips this option and the display shows one of the Level 1 main menu options. CAUTION: If you have attached a printer to each interface and want to share the printer, you must add additional memory to the printer. (See Appendix A.) Then you must set the MEMORY SHARE option in Level 2 before you select the channel. If you have not set the MEMORY SHARE option, CH P is selected. After you select the channel, one of the main menu options appears on the display. The printer stores the settings for each channel separately. The settings you choose for one channel do not affect the settings of the other. Move to the desired option When you enter SelecType Level 1 or Level 2, one of the main menu options appears on the display. To look at the other options at this level, you can use the and buttons. Press until the INPUT option appears on the display, as shown below. 3-8 SelecType