Epson PowerLite Pro G5750WU User's Guide - Page 140
Gently insert the new lamp. If it doesn't fit easily, make sure it is, facing the right way.
View all Epson PowerLite Pro G5750WU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 140 highlights
note Even when the lamp cover is removed, it is still attached to the projector to prevent it from falling when the projector is mounted on the ceiling. 3. Loosen the lamp cover screws (you don't need to remove them). Then remove the lamp cover. 4. Loosen the two screws holding the lamp in place (you can't remove them). Loosen, but don't remove these screws note The lamp(s) in this product contain mercury. Please consult your state and local regulations regarding disposal or recycling. Do not put in the trash. 5. Hold the lamp as shown and pull it straight out. 6. Gently insert the new lamp. (If it doesn't fit easily, make sure it is facing the right way.) 140 Maintaining the Projector
140
Maintaining the Projector
3.
Loosen the lamp cover screws (you don’t need to remove them).
Then remove the lamp cover.
4.
Loosen the two screws holding the lamp in place (you can’t
remove them).
5.
Hold the lamp as shown and pull it straight out.
6.
Gently insert the new lamp. (If it doesn’t fit easily, make sure it is
facing the right way.)
note
Even when the lamp cover is
removed, it is still attached
to the projector to prevent it
from falling when the
projector is mounted on the
ceiling.
Loosen, but don’t
remove these screws
note
The lamp(s) in this
product contain mercury.
Please consult your state and
local regulations regarding
disposal or recycling. Do not
put in the trash.