Epson PowerLite Pro G5750WU User's Guide - Page 30
Connecting to a Computer
View all Epson PowerLite Pro G5750WU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
note After positioning the projector, you may want to connect a Kensington MicroSaver® anti-theft device to the lock port on the projector. You can purchase this from Epson; see page 15. Ideally, you should place the projector directly in front of the center of the screen, facing it toward the screen squarely. The base of the lens should be about level with the bottom of the screen. Projector Screen If you place the projector below screen level, you can use the vertical lens shift dial to raise the lens (see page 57). You can also tilt the projector up by extending the front adjustable foot. Tilting the projector causes the image to become "keystone" shaped, but you can correct the distortion (see page 58). For instructions on installing the projector in a permanent location, such as a theater or conference room, see page 163. note To connect a Macintosh that includes only a Mini DisplayPort or Mini-DVI port for video output, you need to obtain an adapter that allows you to connect to the projector's VGA video port. Contact Apple for compatible adapter options. Connecting to a Computer You can connect the projector to any computer that has a standard video output (monitor) port, including desktop models, PC and Macintosh computers, and hand-held devices. If you have the optional wireless mouse receiver, you can use your remote control as a wireless mouse when projecting from a computer (page 70). 30 Setting Up the Projector