Epson PowerLite Pro G5750WU User's Guide - Page 59
Using Keystone Correction
View all Epson PowerLite Pro G5750WU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
You see this screen: 5. Use the pointer button on the remote control (or the arrow buttons on the projector) to select the corner you want to adjust, and press Enter. 6. Use the pointer button on the remote control (or the arrow buttons on the projector) to adjust the shape, then press Esc when you are finished. 7. Repeat steps 5 and 6 as needed to adjust the other corners. 8. When you're done, press Esc to exit. Using Keystone Correction You can manually adjust the shape of the image to compensate for vertical and horizontal keystone distortion. Before performing horizontal or vertical keystone, use the lens shift function to horizontally center the lens and vertically move the lens to the top or bottom (see page 57); otherwise, the distortion will not be corrected accurately. Also, the distortion may not be corrected accurately for some zoom settings. 1. Press the Menu button on the remote control or projector. 2. Select the Settings menu and press Enter. 3. From the Settings menu, select Keystone and press Enter. 4. Select H/V-Keystone and press Enter. note To undo your Quick Corner adjustments, press and hold the Esc button for about 2 seconds, select Reset Quick Corner from the screen that appears, then press Enter. note Epson recommends using Quick Corner to accurately adjust keystone distortion. See page 58. note You can also use the projector's arrow buttons to perform keystone correction as long as the projector's Keystone setting is set to H/V-Keystone. Displaying and Adjusting the Image 59