Epson PowerLite Pro G5750WU User's Guide - Page 81

5. If you want to create a password for using PJLink to control the projector, highlight PJLink Password, press Enter, and enter a password of up to 8 alphanumeric characters. When you're done, highlight Finish and press Enter. 6. If you want to create a password for remote access to the projector, highlight Web Control Password, press Enter, and enter a password of up to 8 alphanumeric characters. When you're done, highlight Finish and press Enter. 7. If you want to set up a security keyword so that only people who are in the same room as the projector can access it, set the Projector keyword option to On. Then when you want to connect to the projector, it displays a randomized four-digit number or "keyword" on the screen. If you're using EasyMP Network Projection, you can enter the keyword on your computer to connect (see the EasyMP Network Projection Operation Guide for details). 8. When you're done making these settings, highlight the Return button at the top of the screen, then press Enter. Choose Complete and press Enter, then choose Yes and press Enter to save your settings. 9. Press Menu to exit. Configuring a Wireless Connection After you install the optional Wireless 802.11g/b/a Module, you can use the EasyMP Network Projection software to connect to the projector and send images wirelessly in two modes: Ad Hoc mode or Access Point mode. ■ Ad Hoc mode (computer-to-computer mode) lets you connect just one computer to the projector at a time; it's easy to set up, and the only equipment you need is a computer with a wireless (802.11g, 802.11b, or 802.11a) network card or adapter, or a Macintosh with an AirPort® or AirPort Extreme card. When you connect with this mode, any connection to other wireless networks is broken; you can connect to the projector only. note You can interrupt projection even when a keyword is used. Press the Esc button on the remote control and select the Close option. note Make sure you've installed the EasyMP Network Projection software as described in the EasyMP Network Projection Operation Guide. To connect to the projector over a wireless network, your computer must be running Windows 7, Windows Vista, Windows XP, or Windows 2000. Your Mac must be running Mac OS X 10.3 to 10.6. Access Point mode (infrastructure mode) is required to achieve transfer speeds up to 54MB/sec on an 802.11g network. Ad Hoc mode (computer-tocomputer mode) limits network connections to 11MB/sec. This is a standard specification of 802.11g networking. Using the Projector on a Network 81