Epson PowerLite Pro G5750WU User's Guide - Page 181
in fire or electric shock., Do not place anything that can become warped or damaged by heat near
View all Epson PowerLite Pro G5750WU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 181 highlights
distinct change in performance; if smoke, strange odors, or strange noises come from the projector; if the power cord or plug is damaged or frayed; if liquid or foreign objects get inside the projector, or if it has been exposed to rain or water; if it has been dropped or the housing has been damaged. ■ Except as specifically explained in this User's Guide, do not attempt to service this product yourself. Refer all servicing to qualified personnel. Opening or removing covers may expose you to dangerous voltages and other hazards. ■ Never open any covers on the projector except as specifically explained in this User's Guide. Never attempt to disassemble or modify the projector (including consumables). Refer all repairs to qualified service personnel. ■ Use the type of power source indicated on the projector. Use of a different power source may result in fire or electric shock. If you are not sure of the power available, consult your dealer or power company. ■ If you use the projector in the country where it was purchased, only use the power cable that came with the projector. If you use the projector in a country other than where you purchased it, use the correct power cord for that country. ■ Take the following precautions when handling the plug: Do not overload wall outlets, extension cords, or power strips. Do not hold the plug with wet hands. Do not insert the plug into a dusty outlet. Insert the plug firmly into the outlet. Do not pull the power cord when disconnecting the plug; always be sure to hold the plug when disconnecting it. Failure to comply with these precautions could result in fire or electric shock. ■ Do not place anything that can become warped or damaged by heat near the exhaust vents. Do not bring your hands or face close to the vents while projection is in progress. ■ Before you move the projector, make sure its power is turned off, the plug is disconnected from the outlet, and all cables are disconnected. ■ Do not project images while the detachable lens cover is still attached. Heat may cause the lens cover to melt, and if you touch the lens cover you could get burned. ■ Do not block the light coming from the projector with any object. The object may be damaged or the reflected light may heat the lens and damage the projector. ■ Do not touch the lens with bare hands. ■ Always attach the lens cover to the lens when not using the projector, to prevent the lens from becoming dirty or damaged. Notices 181