Epson PowerLite Pro G5750WU User's Guide - Page 152

The message Not Supported is displayed. ■ Make sure the correct input signal is selected in the Signal menu (see page 116). ■ Make sure your computer's resolution and frequency or refresh rate is supported by the projector (see page 174). If necessary, change your computer's settings. The projector and notebook don't display the same image If you're using a PC notebook: ■ On most systems, there's a function key that lets you toggle between the LCD screen and the projector, or display on both at the same time. It may be labeled CRT/LCD or have an icon such as . You may have to hold down the Fn key while pressing it. Allow a few seconds for the projector to sync up after changing the setting. ■ If the function key doesn't permit you to display simultaneously on both screens, you should check your monitor settings to make sure both the LCD screen and the external monitor port are enabled. From the Control Panel, open the Display utility, select the Settings option, then select the Advanced option (in Windows Vista, right-click on the desktop, select Personalize, select Display Settings, then select Advanced Settings).The method for adjusting the settings varies by brand; you may need to click a Monitor tab, then make sure the external Monitor port is set as your primary display and/or enabled. See your computer's documentation or online help for details If you're using Mac OS X: You may need to set up your system to display on the projector screen as well as the LCD screen. Make sure your projector is connected, then follow these steps: 1. Open System Preferences. 2. Click Displays. 152 Solving Problems