Epson PowerLite Pro G5750WU User's Guide - Page 62

note In order to use the Split Screen feature, one of your images must be input through the HDMI or DVI-D (G5450WUNL/ G5750WUNL only) port. The other image can be input through the Computer1, Computer2 (G5550NL/G5650WNL/ G5950NL only), BNC, S-Video, Video1, or Video2 ports. Images input through the USB or LAN port cannot be projected as part of the split screen. (G5650WNL), or 1920 × 1200 (G5450WUNL/G5750WUNL); images are cut off if the resolution is over 1024 × 768 (G5550NL/G5950NL), 1280 × 800 (G5650WNL), or 1920 × 1200 (G5450WUNL/G5750WUNL). Press the Aspect button repeatedly to cycle through the available options. You can also change the aspect ratio using the projector's Signal menu. See page 116 for details. Projecting Two Images Simultaneously You can use the projector's split screen feature to divide the screen into left and right sections and simultaneously project two images. Follow these steps to activate the split screen: 1. Press the Split button on the remote control. The currently selected input source will move to the left side of the screen. 2. Press the Menu button. You see the following screen: 3. To change one of the images, highlight either Source Left or Source Right (whichever side contains the image you want to change) and press Enter. Then highlight the input source you want to change to and press Enter again. 4. To switch the images, highlight Swap Screens and press Enter. 5. To change one of the image sizes, highlight Screen Size and press Enter. Then highlight a sizing option and press Enter again. Press Menu to exit. 62 Displaying and Adjusting the Image