HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Services Conf - Page 141
Con Switch B, Enable IPv6.
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 141 highlights
# Assign GigabitEthernet 1/0/3 to service loopback group 1, and disable STP and LLDP on the interface. [SwitchA] interface GigabitEthernet 1/0/3 [SwitchA-GigabitEthernet1/0/3] undo stp enable [SwitchA-GigabitEthernet1/0/3] undo lldp enable [SwitchA-GigabitEthernet1/0/3] port service-loopback group 1 [SwitchA-GigabitEthernet1/0/3] quit # Configure a 6to4 tunnel. [SwitchA] interface tunnel 0 [SwitchA-Tunnel0] ipv6 address 2002:201:101::1/64 [SwitchA-Tunnel0] source vlan-interface 100 [SwitchA-Tunnel0] tunnel-protocol ipv6-ipv4 6to4 # Reference service loopback group 1 on the tunnel. [SwitchA-Tunnel0] service-loopback-group 1 [SwitchA-Tunnel0] quit # Configure a static route whose destination address is 2002::/16 and next-hop is the tunnel interface. [SwitchA] ipv6 route-static 2002:: 16 tunnel 0 • Configure Switch B: # Enable IPv6. system-view [SwitchB] ipv6 # Configure an IPv4 address for VLAN-interface 100. [SwitchB] interface vlan-interface 100 [SwitchB-Vlan-interface100] ip address 5.1.1.1 24 [SwitchB-Vlan-interface100] quit # Configure an IPv6 address for VLAN-interface 101. [SwitchB] interface vlan-interface 101 [SwitchB-Vlan-interface101] ipv6 address 2002:0501:0101:1::1/64 [SwitchB-Vlan-interface101] quit # Create service loopback group 1 to support the tunnel service. [SwitchB] service-loopback group 1 type tunnel # Assign GigabitEthernet 1/0/3 to service loopback group 1, and disable STP, and LLDP on the interface. [SwitchB] interface GigabitEthernet 1/0/3 [SwitchB-GigabitEthernet1/0/3] undo stp enable [SwitchB-GigabitEthernet1/0/3] undo lldp enable [SwitchB-GigabitEthernet1/0/3] port service-loopback group 1 [SwitchB-GigabitEthernet1/0/3] quit # Configure the 6to4 tunnel. [SwitchB] interface tunnel 0 [SwitchB-Tunnel0] ipv6 address 2002:0501:0101::1/64 [SwitchB-Tunnel0] source vlan-interface 100 [SwitchB-Tunnel0] tunnel-protocol ipv6-ipv4 6to4 # Reference service loopback group 1 on the tunnel. [SwitchB-Tunnel0] service-loopback-group 1 133