HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Services Conf - Page 49
Configuring the DHCP relay agent to support Option 82, Configuration prerequisites
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Step 1. Enter system view. 2. Configure the DHCP relay agent to release an IP address. Command system-view dhcp relay release ip client-ip Remarks N/A The IP address must be in a dynamic client entry. Configuring the DHCP relay agent to support Option 82 Configuration prerequisites Before you perform this configuration, complete the following tasks: • Enable DHCP. • Enable the DHCP relay agent on the specified interface. • Correlate a DHCP server group with relay agent interfaces. Configuration guidelines • To support Option 82, perform related configuration on both the DHCP server and relay agent. • If the handling strategy of the DHCP relay agent is configured as replace, you must configure a padding format for Option 82. If the handling strategy is keep or drop, you need not configure any padding format. • If sub-option 1 (node identifier) of Option 82 is padded with the device name (sysname) of a node, the device name must contain no spaces. Otherwise, the DHCP relay agent will drop the message. Configuration procedure To configure the DHCP relay agent to support Option 82: Step Command 1. Enter system view. system-view 2. Enter interface view. interface interface-type interface-number 3. Enable the relay agent to support Option 82. dhcp relay information enable 4. Configure the handling strategy for requesting messages containing Option dhcp relay information strategy { drop | keep | replace } 82. Remarks N/A N/A Disabled by default. Optional. replace by default. 41