HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Services Conf - Page 44
DHCP relay agent configuration task list, Enabling DHCP, Enabling the DHCP relay agent on an
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
If a client's requesting message has... Handling strategy N/A N/A Padding format The DHCP relay agent will... verbose user-defined Forward the message after adding the Option 82 padded in verbose format. Forward the message after adding the user-defined Option 82. DHCP relay agent configuration task list Task Enabling DHCP Enabling the DHCP relay agent on an interface Correlating a DHCP server group with a relay agent interface Configuring the DHCP relay agent security functions Enabling offline detection Configuring the DHCP relay agent to release an IP address Configuring the DHCP relay agent to support Option 82 Setting the DSCP value for DHCP packets Remarks Required Required Required Optional Optional Optional Optional Optional Enabling DHCP Enable DHCP before performing other configurations related to the DHCP relay agent. To enable DHCP: Step 1. Enter system view. 2. Enable DHCP. Command system-view dhcp enable Remarks N/A Disabled by default Enabling the DHCP relay agent on an interface With the DHCP relay agent enabled, an interface forwards incoming DHCP requests to a DHCP server for address allocation. The IP address pool containing the IP address of the DHCP relay agent enabled interface must be configured on the DHCP server. Otherwise, the DHCP clients connected to the relay agent cannot obtain correct IP addresses. To enable the DHCP relay agent on an interface: Step 1. Enter system view. Command system-view Remarks N/A 36