HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Services Conf - Page 98
Con an IPv6 anycast address, Command, Remarks, address auto link-local
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
Step 3. Configure the interface to automatically generate an IPv6 link-local address. Command ipv6 address auto link-local Remarks Optional. By default, no link-local address is configured on an interface. After an IPv6 global unicast address is configured on the interface, a link-local address is generated automatically. To configure an IPv6 link-local address manually: Step 1. Enter system view. 2. Enter interface view. Command system-view interface interface-type interface-number 3. Configure an IPv6 link-local ipv6 address ipv6-address address manually. link-local Remarks N/A N/A Optional. By default, no link-local address is configured on an interface. After an IPv6 global unicast address is configured on the interface, a link-local address is generated automatically. After an IPv6 global unicast address is configured for an interface, a link-local address is generated automatically. • The automatically generated link-local address is the same as the one generated by using the ipv6 address auto link-local command. • If a link-local address is manually assigned to an interface, this manual link-local address takes effect. If the manually assigned link-local address is removed, the automatically generated link-local address takes effect. The undo ipv6 address auto link-local command can only remove the link-local addresses generated through the ipv6 address auto link-local command. • If an IPv6 global unicast address is already configured for an interface, the interface still has a link-local address because the system automatically generates one for the interface. • If no IPv6 global unicast address is configured, the interface has no link-local address. Configure an IPv6 anycast address To configure an IPv6 anycast address for an interface: Step 1. Enter system view. 2. Enter interface view. 3. Configure an IPv6 anycast address. Command Remarks system-view N/A interface interface-type interface-number N/A ipv6 address ipv6-address/prefix-length anycast Optional. By default, no IPv6 anycast address is configured on an interface. 90