HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Services Conf - Page 159
Displaying and maintaining tunneling configuration
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 159 highlights
FF02::1 MTU is 1460 bytes ND reachable time is 30000 milliseconds ND retransmit interval is 1000 milliseconds Hosts use stateless autoconfig for addresses IPv6 Packet statistics: ... # Ping the IPv6 address of the peer interface VLAN-interface 100 from Switch A. [SwitchA] ping ipv6 2002:3::1 PING 2002:3::1 : 56 data bytes, press CTRL_C to break Reply from 2002:3::1 bytes=56 Sequence=1 hop limit=64 time = 31 ms Reply from 2002:3::1 bytes=56 Sequence=2 hop limit=64 time = 1 ms Reply from 2002:3::1 bytes=56 Sequence=3 hop limit=64 time = 16 ms Reply from 2002:3::1 bytes=56 Sequence=4 hop limit=64 time = 16 ms Reply from 2002:3::1 bytes=56 Sequence=5 hop limit=64 time = 31 ms --- 2002:3::1 ping statistics --5 packet(s) transmitted 5 packet(s) received 0.00% packet loss round-trip min/avg/max = 1/19/31 ms Displaying and maintaining tunneling configuration Task Command Remarks Display information about tunnel interfaces. display interface [ tunnel ] [ brief [ down ] ] [ | { begin | exclude | include } regular-expression ] display interface tunnel number [ brief ] [ | { begin | exclude | include } regular-expression ] Available in any view Display IPv6 information on tunnel interfaces. display ipv6 interface tunnel [ number ] [ brief ] [ | { begin | exclude | include } regular-expression ] Available in any view Clear statistics on tunnel interfaces. reset counters interface [ tunnel [ number ] ] Available in user view 151