HP Dc7700 HP Compaq dx7300 and dc7700 Business PC Technical Reference Guide, 1 - Page 141
Default Values IDE/SATA, Multisector Transfers
UPC - 882780715318
View all HP Dc7700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 141 highlights
BIOS ROM Heading File (continued) Option Ignore Changes and Exit Save Changes and Exit Table 8-2 Setup Utility Description Exits Computer Setup without applying or saving any changes. Saves changes to system configuration or default settings and exits Computer Setup. Storage Device Configuration Lists all installed BIOS-controlled storage devices. When a device is selected, detailed information and options are displayed. The following options may be presented. Diskette Type Identifies the highest capacity media type accepted by the diskette drive. Legacy Diskette Drives Options are 3.5" 1.44 MB and 5.25" 1.2 MB. Drive Emulation Allows you to select a drive emulation type for a certain storage device. (For example, a Zip drive can be made bootable by selecting diskette emulation.) Drive Type Emulation Options ATAPI Zip drive None (treated as Other) Diskette (treated as diskette drive) ATA Hard disk None (treated as Other) Disk (treated as hard drive) Legacy diskette No emulation options available CD-ROM drive No emulation options available ATAPI LS-120 None (treated as Other). Diskette (treated as diskette drive). Default Values IDE/SATA Multisector Transfers (ATA disks only) Specifies how many sectors are transferred per multi-sector PIO operation. Options (subject to device capabilities) are Disabled, 8, and 16. ïCAUTION: Ordinarily, the translation mode selected automatically by the BIOS should not be changed. If the selected translation mode is not compatible with the translation mode that was active when the disk was partitioned and formatted, the data on the disk will be inaccessible. ✎ Support for specific Computer Setup options may vary depending on the hardware configuration. Technical Reference Guide www.hp.com 8-7