HP Dc7700 HP Compaq dx7300 and dc7700 Business PC Technical Reference Guide, 1 - Page 161

Error Messages and Codes A.9 Diskette Drive Error Messages (6xx-xx) Table A-8. Diskette Drive Error Messages Message Probable Cause Message Probable Cause 6xx-01 Exceeded maximum soft error limit 6xx-20 Failed to get drive type 6xx-02 Exceeded maximum hard error limit 6xx-21 Failed to get change line status 6xx-03 Previously exceeded max soft limit 6xx-22 Failed to clear change line status 6xx-04 Previously exceeded max hard limit 6xx-23 Failed to set drive type in ID media 6xx-05 Failed to reset controller 6xx-24 Failed to read diskette media 6xx-06 Fatal error while reading 6xx-25 Failed to verify diskette media 6xx-07 Fatal error while writing 6xx-26 Failed to read media in speed test 6xx-08 Failed compare of R/W buffers 6xx-27 Failed speed limits 6xx-09 Failed to format a tract 6xx-28 Failed write-protect test 6xx-10 Failed sector wrap test -- -- 600-xx = Diskette drive ID test 601-xx = Diskette drive format 602-xx = Diskette read test 603-xx = Diskette drive R/W compare test 604-xx = Diskette drive random seek test 605-xx = Diskette drive ID media 606-xx = Diskette drive speed test 607-xx = Diskette drive wrap test 608-xx = Diskette drive write-protect test 609-xx = Diskette drive reset controller test 610-xx = Diskette drive change line test 611-xx = Pri. diskette drive port addr. conflict 612-xx = Sec. diskette drive port addr. conflict 694-00 = Pin 34 not cut on 360-KB drive 697-00 = Diskette type error 698-00 = Drive speed not within limits 699-00 = Drive/media ID error (run Setup) Technical Reference Guide www.hp.com A-9