HP LaserJet 3200 Service Manual - Page 129
Solenoid, Release the solenoid.
View all HP LaserJet 3200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 129 highlights
Solenoid 1 Remove the DIMMs, the back, right, and left covers, the internal paper guide, the top cover (see pages 89 through 95), and the gear train (see pages 124 and 125). 2 Remove the single screw (callout 1) that secures the solenoid to the printer chassis. 12 Figure 55. Solenoid removal Note 3 Release the solenoid. During reassembly, rotate the clutch so that the flat spot on the clutch allows the feed roller (gear) to turn freely. EN Internal assemblies 127
EN
Internal assemblies
127
Solenoid
1
Remove the DIMMs, the back, right, and left covers, the internal
paper guide, the top cover (see pages 89 through 95), and the
gear train (see pages 124 and 125).
2
Remove the single screw (callout 1) that secures the solenoid to
the printer chassis.
Figure 55.
Solenoid removal
3
Release the solenoid.
Note
During reassembly, rotate the clutch so that the flat spot on the clutch
allows the feed roller (gear) to turn freely.
2
1