HP LaserJet 3200 Service Manual - Page 60
rollers, pads, and feet in a side-to, Using a dry, lint-free cloth, wipe
View all HP LaserJet 3200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
4 4 Inspect each of the six rollers in the scanner area for dirt or debris. Clean any dirty rollers with a lint-free cloth (such as lens tissues) dampened with a small amount of isopropyl alcohol. CAUTION 5 Do not spray alcohol or any other liquid directly into the product. Doing so can damage the product. CAUTION As much as possible, avoid touching the white strip and glass strip with alcohol. 7 5 Near the top, inside edge of the document release door, inspect the two pressure feet and pad for dirt or debris. If they are dirty, clean them with a lint-free cloth sprayed with a small amount of alcohol. 6 Using a dry, lint-free cloth, wipe rollers, pads, and feet in a side-toside motion to remove loosened dirt. 7 After alcohol inside the scanner area has dried completely, close the document release door. Every time you clean the scanner path, you should recalibrate the scanner. See "Recalibrating the scanner" on page 59. 58 Chapter 3 - Maintenance EN