HP LaserJet 3200 Service Manual - Page 142
CAUTION, ECU pan removal 2 of 2
View all HP LaserJet 3200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 142 highlights
CAUTION 7 Slowly lift the ECU plate away from the printer chassis. Be very careful not to damage or break the connectors underneath the ECU plate as you lift it from the printer chassis. 8 Reach between the plate and the chassis and unwind the cables from their cable guides until there is enough slack in the cables to allow access to the bottom of the ECU plate. 9 Unwind and disconnect all cables until the ECU board is separated from the chassis. Figure 67. ECU pan removal (2 of 2) Note The entire ECU board can be replaced as a single unit (cables do not ship with the replacement board; if cables are damaged during removal, you will have to purchase new ones). 140 Chapter 5 - Removal and replacement EN
140
Chapter 5 - Removal and replacement
EN
7
Slowly lift the ECU plate away from the printer chassis.
CAUTION
Be very careful not to damage or break the connectors underneath the
ECU plate as you lift it from the printer chassis.
8
Reach between the plate and the chassis and unwind the cables
from their cable guides until there is enough slack in the cables to
allow access to the bottom of the ECU plate.
9
Unwind and disconnect all cables until the ECU board is
separated from the chassis.
Figure 67.
ECU pan removal (2 of 2)
Note
The entire ECU board can be replaced as a single unit (cables do not
ship with the replacement board; if cables are damaged during
removal, you will have to purchase new ones).