HP LaserJet 3200 Service Manual - Page 183
Diagnostic mode, To gain access to diagnostic mode
View all HP LaserJet 3200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 183 highlights
Note Diagnostic mode Use diagnostic mode to check the functionality of LEDs, the control panel display LCDs, and to check the firmware version. Diagnostic mode is available for firmware version 2.2 or higher. To gain access to diagnostic mode 1 Unplug (or turn off) the product from the power source. 2 Press and hold down VOLUME, STOP/CLEAR, and 1 on the one- touch keypad simultaneously. 3 Continue to hold down the keys while you plug back in (or turn on) the product, through the entire power-on sequence. The table below shows the tests and key sequences to perform in diagnostic mode: Table 17. Diagnostic mode key sequences To perform this test . . . Press these keys . . . Toggle LED1 on/off 1 or 5 on the one-touch keypad Toggle LED2 on/off 2 or 6 on the one-touch keypad Access LCD pattern 1 (solid fill) 1 on the numeric keypad, Access LCD pattern 2 (empty fill) 2 or 8 on the numeric keypad Access LCD pattern 3 (> fill) 3 or 9 on the numeric keypad, or REDUCE/ENLARGE Access LCD pattern 4 (H fill) 4 on the numeric keypad or 3 or 7 on the one-touch keypad Access LCD pattern 5 (frame fill) 5 or 0 on the numeric keypad, or RESOLUTION Access LCD pattern 6 (check fill) 6 on the numeric keypad Access LCD pattern 7 (ROM check) 7 on the numeric keypad or REDIAL/ PAUSE Access firmware version number #, *, or 10 on the one-touch keypad EN Service mode functions 181