HP LaserJet 3200 Service Manual - Page 141
ECU pan, removing the ECU pan.
View all HP LaserJet 3200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 141 highlights
Note ECU pan 1 Remove the DIMMs, the back, right, and left covers, the internal paper guide, and the top cover (see pages 89 through 95). 2 Remove the printer door (see pages 96 through 99), and the formatter pan (see page 137). 3 Disconnect the ECU cable. If the fusing element cables are connected, disconnect them before removing the ECU pan. 4 Remove the two screws fastened to the brackets on the sides of the pan. 5 Remove the two screws reached through openings in the side of the black plastic printer chassis. Figure 66. ECU pan removal (1 of 2) 6 Disconnect the small solenoid connection from the back of the ECU. EN Bottom assemblies 139
EN
Bottom assemblies
139
ECU pan
1
Remove the DIMMs, the back, right, and left covers, the internal
paper guide, and the top cover (see pages 89 through 95).
2
Remove the printer door (see pages 96 through 99), and the
formatter pan (see page 137).
3
Disconnect the ECU cable.
Note
If the fusing element cables are connected, disconnect them before
removing the ECU pan.
4
Remove the two screws fastened to the brackets on the sides of
the pan.
5
Remove the two screws reached through openings in the side of
the black plastic printer chassis.
Figure 66.
ECU pan removal (1 of 2)
6
Disconnect the small solenoid connection from the back of the
ECU.