HP LaserJet 3200 Service Manual - Page 41

Table 7. Control panel error messages (continued) Message FAX RECEIVE ERROR FAX SEND ERROR GROUP DIAL NOT ALLOWED IN GROUP GROUP IS FULL. [FAX] TO START IN CLEANING MODE. PLEASE WAIT 1-3 MIN. INVALID DATE INVALID TIME JOB SETTINGS CLEARED Cause Solution An error occurred while trying to receive a fax. Ask the sender to resend the fax. Try faxing back to sender or another fax machine. Check that the telephone cord is securely connected by unplugging and replugging the cord. Check for a dial tone on the phone line by pressing FAX/ SEND. Make sure the phone is working by disconnecting the product, plugging in a telephone to the phone line, and making a voice call. Connect the product to a different phone line. An error occurred while trying to send a fax. Try resending the fax. Try faxing to another fax number. Check that the telephone cord is securely connected by unplugging and replugging the cord. Check for a dial tone on the phone line by pressing FAX/ SEND. Make sure the phone is working by disconnecting the product, plugging in a telephone to the phone line, and making a voice call. Connect the product to a different phone line. The speed-dial code you entered is programmed for a group. Adding a group-dial to another group-dial is not allowed. Enter one-touch keys (programmed as an individual speed dial) or speed-dial codes to a group-dial The maximum number of fax Resend to the ad hoc group numbers that can be added to an using less fax numbers. ad hoc group is 20. The product is running an internal Wait for the product to finish the cleaning cycle. cleaning cycle. The message will clear when the cycle is finished. An invalid date was entered, such as June 35. Reenter the date. An invalid time was entered, such Reenter the time. as 25:99 P.M. The product has cleared job settings. Reenter any desired job settings. EN Control panel error messages 39