HP LaserJet 3200 Service Manual - Page 185

CAUTION NVRAM init NVRAM init sets all default variables stored in NVRAM back to factory default values or to a default ROM value, depending on the variable, and performs a system reset. Performing NVRAM init can cause the product to violate local telephone regulations. Reset the language and country/region code after performing NVRAM init. NVRAM init resets the following: l All menu settings to factory default values, including fax header and company name l Factory settings such as formatter number, page counts, and factory paper settings l Fax memory-all faxes in memory are erased l All localization settings, including lanuage and country/region code To perform NVRAM init 1 Unplug (or turn off) the product from the power source. 2 Press and hold down the SYMBOLS key and ENTER/MENU. 3 Continue to hold down the keys while you plug back in (or turn on) the product, through the entire power on sequence. 4 When the control panel display reads PERMANENT STORAGE INITIALIZE or HP LASERJET 3200, release the keys. 5 Allow the product to return to READY before using the product. PJL software commands To set the following NVRAM variables: Factory printer DEFAULT PAPER, scanner factory default paper size will be set to the same value automatically. Factory printer DEFAULT LPARM:PCL SYMSET Factory DEFAULT OEM bit Factory DEFAULT PRINTPAGECOUNT Factory DEFAULT SCANPAGECOUNT Factory DEFAULT COPYPAGECOUNT EN Service mode functions 183