HP Media Center m400 HP Media Center PC - User's Guide 5990-6456 - Page 194
Installing a New Optical Drive
View all HP Media Center m400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 194 highlights
n A jumper is a small plastic connector or wire which electrically connects two pins in order to define a configuration setting. Installing a New Optical Drive 1 Make sure the jumper on the new drive is in the CS (Cable Select) position. Slide the new optical drive through the front of the computer. Don't slide the drive in all the way - you need room to attach the cables. (The illustration below is an example drive with Cable Select jumper installed. Your drive may vary.) 2 Connect the cables to the back of the drive. 3 Push the drive all the way in, align the screw holes, and insert the screws. 4 Replace the fan duct. See "Replacing the Front Panel" on page 185. 5 Replace the front panel. See "Replacing the Front Panel" on page 185. 6 Replace the side panels. See "Replacing the Side Panels" on page 183. CS SL MA 188 hp media center pc user's guide