HP Media Center m400 HP Media Center PC - User's Guide 5990-6456 - Page 24

Connecting the Signal Source This section describes connecting the signal source for TV. Connect the signal source for the TV by using the TV (in) coaxial connector or the S-VID IN (S-video) connector: ■ Plug the connector of a coaxial cable from your TV antenna or from your TV cable (wall or set-top box) into the TV/RF-IN (D) connector on the back of the PC, and then turn the connector to tighten it. You can also plug audio cables (not provided) from your set-top box or VCR into the Audio in right (red) (A) connector and the Audio in left (white) (B) connector on the back of the PC. Or ■ Plug a cable into the S-VID IN (C) connector on the back of the PC; use an S-video cable (not provided) or use the S-video to composite video adapter cable and the composite video cable. Plug the other end of the cable into your set-top box, VCR, or other device that is providing the signal source for the TV. A B C D E Connecting the FM Radio Antenna (Select Models Only) 1 Plug the FM radio antenna cable into the FM-IN (E) port on the back of the PC. The FM connector is found on the TV tuner card. 2 You may want to extend the ends of the cable to improve your FM radio signal reception. 18 HP Media Center PC User's Guide