HP Media Center m400 HP Media Center PC - User's Guide 5990-6456 - Page 201
Removing Add-In Cards, Replacing Add-In Cards
View all HP Media Center m400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 201 highlights
Removing Add-In Cards 1 Disconnect any external and internal cables attached to the card. 2 Remove the screw on the bracket of the card you are replacing. 3 Hold the metal bracket and the far top corner of the card. Carefully remove the card by pulling the card straight out of the expansion slot. n Be careful of the sharp edges on the expansion slot cover. Replacing Add-In Cards 1 Insert the new card into the slot and push straight down. Make sure the card is properly seated. 2 Attach the screw to secure the card you have replaced. 3 Connect any internal cables to the card. n Do not overload the PC by installing add-in cards that draw excessive current. The chassis is designed to provide 2 amps (average) of +5 V power for each board or card in the chassis. The total +5 V current draw in a fully loaded chassis (one with all add-in card slots filled) must not exceed the total number of slots multiplied by 2 amps. Upgrading and Servicing 195