HP Surestore Disk Array FC60 HP SureStore E Disk Array 12H User's and Service - Page 126

Troubleshooting Troubleshooting Control Panel Error Messages Table 11. Control Panel Error Messages (Disk States) Error Message Explanation Action Disk States: Log information is being logged on the Current Log Disk specified log disk. None. Information only. Disk States: Downed The disk module is in a Not Included state. The user requested the array to enter this state. Use the Include Disk command if you want to include the disk module. Disk States: Failed The disk module is in a failed state. Replace the disk module. Disk States: Failed Setup The disk module failed during initialization. Replace the disk module. Disk States: The log disk has failed. Log Disk Failed Return the log disk to the factory for a replacement. Disk States: Log Disk Full The log disk is full and ready to be evaluated. Return the log disk to the factory for an evaluation of the log. Disk States: Not Included The disk module is not part of a logical drive. You must manually include the disk module to Auto Include is OFF. make it become part of the logical drive set. Disk States: The disk module has been used in a different Previously Used array. None. Information only. CAUTION: The disk module may be used in the present array, but the original data will be lost when Include Disk is executed. Disk States: Ready The disk module is in a ready state. None. Information only. Disk States: Unknown The disk module is in an unknown or unexpected state. Call the support line and remove the disk module. Disk States: Unsupported This type of disk module is unsupported and has not been tested. CAUTION: Replace the disk module with one that is supported. Inclusion of this disk module may cause unpredictable results or loss of data. Disk States: More than one log disk is installed. This log Unused Log Disk disk will not be used. None. Information only. 126