HP Surestore Disk Array FC60 HP SureStore E Disk Array 12H User's and Service - Page 228
Deskside Cabinet Cabling,
View all HP Surestore Disk Array FC60 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 228 highlights
Appendix C. Cabinet Configurations Deskside Cabinet Cabling Deskside Cabinet Cabling To attach the power and SCSI cables to the deskside cabinet, perform the following steps: 1. If present, remove the rear door (7) from the deskside cabinet as shown in Figure 40. 2. Connect the SCSI cables (1) and route them through the hook and loop strap (5) on the left rear of the cabinet. 3. Connect the short SCSI cable (2) if necessary. Refer to "Connecting SCSI Cabling" in the Chapter "Product Description" for more details about SCSI cabling. 4. Connect the power cords (6) to the disk array and route them through the hook and loop strap on the right rear of the cabinet. 5. Reinstall the rear door onto the deskside cabinet. 6. Attach the front door of the disk array as shown in Figure 45. 7. To keep the deskside cabinet from rolling, unscrew the four leveling feet on the bottom four corners of the deskside cabinet until they touch the floor. Figure 40. Deskside Cabinet Cabling 228 Cabinets