Panasonic WJSX650 WJSX650 User Guide - Page 14

Notes: • During the alarm acknowledgement (ACK) status (refer to p. 68), event information is highlighted. • When two or more alarm events have occurred, "∗" is displayed beside the event information. • When an alarm whose display mode setting is OFF occurs, "#" is displayed beside the event information. • When auto tracking is scheduled for a camera event, "#" is displayed beside the camera number. • q to r can be displayed or hidden either altogether or separately. Refer to p. 73 Lists of Operations and Functions for details. I System Controller Display Information The following are the details on terminal mode operations. For PS·Data operations, refer to p. 85 OPERATION (OTHER THAN TERMINAL MODE) or the operating instructions of system controllers. G WV-CU950/650 q w e rt y q Monitor Number Mon01 to 32: Monitor number w Camera Number Cam001 to 999: Camera number C-P0001 to 9999: Camera position number e Event HDR01 to 16: Recorder number Pre000 to 256 (Lighting for 3.0 seconds): Preset position Note: Pre000 is the home position. T-A0001 to 0256: Terminal alarm C-A0001 to 0999: Camera alarm R-A0001 to 0999: Recorder alarm S-A0001 to 1024: Serial alarm V-A0001 to 0999: Video loss r Busy Busy + monitor number (Blinking) A selected monitor is controlled by a higher-priority operator. (Monitor busy) Note: You cannot control the selected monitor, camera, and recorder. Busy + camera/recorder number (Blinking) A selected camera or recorder is controlled by a higher-priority user. (Camera/Recorder busy) Note: You cannot control the selected camera or recorder. t Status Alarm (Blinking): Alarm is occurring. Alarm (Lighting): Alarm is acknowledged. (Refer to p. 68.) Memory + preset position number (Blinking for 3.0 seconds): Preset position is registered. y Sequence Number T-Seq01 to 32: Tour sequence number G-Seq01 to 08: Group sequence number Note: During sequence pause, "P" is displayed beside the sequence number. G-Seq09 to 32: Group preset number Note: This sign disappears when the camera is con- trolled. Invalid (Blinking for 3.0 seconds): You have entered a wrong value. Not Avail (Blinking for 3.0 seconds): • You cannot select a monitor because of lower priority. • You have tried to activate a group sequence or group preset on a monitor not assigned. Prohibited (Blinking for 3.0 seconds): You have tried an operation restricted by the operator's setting. Alarm Buzzer/Button Buzzer Setting With the setting activated: • Alarm buzzer can sound when alarms occur. • Button buzzer can sound when a button is pressed or an error message (Invalid, Prohibited, Level1 Fixed, etc.) is displayed on the LCD. Refer to the operating instructions of system controller for settings. 14