Panasonic WJSX650 WJSX650 User Guide - Page 64
Tour Sequence, Group Sequence/preset, Wv-cu950/650, Wv-cu360c/cj, Notes
View all Panasonic WJSX650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
I Tour Sequence G WV-CU950/650 1. Enter the desired sequence number by pressing the numeric buttons. The entered number will appear on the LCD. I Group Sequence/Preset G WV-CU950/650 1. Select a monitor assigned for desired group sequence/preset. (Refer to p. 57 Monitor Selection.) 2. Enter the desired sequence number by pressing the numeric buttons. The entered number will appear on the LCD. 2. Press the TOUR SEQ button. The tour sequence will be activated. 3. Press the GROUP SEQ button while holding down the SHIFT button. The group sequence will be activated. G WV-CU360C/CJ 1. Enter the desired sequence number by pressing the numeric buttons. The entered number will appear on the LED display. 2. Press the TOUR SEQ button. The tour sequence will be activated. G WV-CU360C/CJ 1. Select a monitor assigned for desired group sequence/preset. (Refer to p. 57 Monitor Selection.) 2. Enter the desired sequence number by pressing the numeric buttons. The entered number will appear on the LED display. 3. Press the GROUP SEQ button. The group sequence will be activated. G Notes: • If you have specified Group Sequence 9 to 32 in Step 2, group preset will be activated. The system status will be the same as that after camera selection. • Group sequence/preset will not be activated for monitors selected by operators with higher priority or restricted by the monitor access setting • When one of the monitors assigned for the active group sequence is controlled by a higher-priority operator, you cannot control the monitors. (Monitor busy) 64