Panasonic WJSX650 WJSX650 User Guide - Page 69
Return To Alarm Mode Status, Alarm Suspension, Alarm History Display, Wv-cu950/650, Wv-cu360c/cj
View all Panasonic WJSX650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
*1 WV-CU950/650 *2 WV-CU360C/CJ Notes: • Alarm all reset will also be conducted when setting changes are performed in SETUP MENU or WJ-SX650 Series Administrator Console. • To reset the alarms occurred to recorders, perform alarm all reset. Alarm all reset is available even while no alarms are occurring. I Return to Alarm Mode Status You can recover from the ACK status to the alarm mode status. G WV-CU950/650 Press the ACK button while holding down the SHIFT button. The alarm mode will be recovered. G WV-CU360C/CJ This operation is not available. I Alarm Suspension You can suspend the system from accepting alarm input signals when you do not want to be disturbed. (Alarm will also be suspended for recorders.) 1. Press the ALM SUSPEND*1 (or SUSPEND*2) button while holding down the SHIFT button. The alarm will be suspended. 2. To cancel the alarm suspension mode, press the ALM SUSPEND*1 (or SUSPEND*2) button while holding down the SHIFT button again. *1 WV-CU950/650 *2 WV-CU360C/CJ I Alarm History Display The latest 1 000 alarm records (date, time and details) can be displayed as the alarm history on an active monitor. Note: Alarm History Display is not available on monitors in the alarm mode or during recorder selection. G WV-CU950/650 Press the ALM RECALL button. The Alarm History Display will appear on the selected monitor. G WV-CU360C/CJ Press the OSD and ALM H buttons at a time. The Alarm History Display will appear on the selected monitor. G Details on Alarm History Display ALARM HISTORY 1 of 100 M D Y H M S ALARM ACTION REC Aug31/06∗11:59:00PM ALL 12345 K4-8 Aug31/06∗11:58:00PM C-999 M32 C100 001 Aug31/06∗11:57:00PM V-001 M03 T32 256 Aug31/06∗11:56:00PM POWER Apr15/05∗09:15:25AM POWER Apr15/05∗09:15:25AM R-003 Apr15/05∗09:13:54AM S-0002 M10*G32 --- Apr15/05∗09:12:32AM T-001 M20 --- 999 Jan02/05 03:05:10PM S 56789 PC Jan01/05 03:04:08PM S 101 PSD T-TERMINAL C-CAMERA R-RECORDER S-SERIAL V-VIDEO LOSS SSUSPEND "∗" beside the time indicates daylight saving time (summer time). The following items are display details. • ALARM (Highlighted for reset alarms) T-001 to 256: Terminal alarm (Example: For T-001, "001" means the number of alarm input signal accepted by the ALARM IN port of video input board.) C-001 to 999: Camera alarm (Example: For C-001, "001" means the number of camera supplying an alarm input signal to the unit.) R-001 to 999: Recorder alarm (Example: For R-001, "001" means the number of camera associated with the recorder supplying an alarm input signal to the unit.) S-0001 to 1024: Serial alarm (Example: For S-0001, "0001" means the serial command alarm input number.) V-001 to 999: Video loss (Example: For V-001, "001" means the number of camera to which video loss has occurred) ALL: Alarm all reset S : Alarm suspension ON/OFF 69