Panasonic WJSX650 WJSX650 User Guide - Page 71

Timer Descriptions I Timer Event With the timer event setting, timer events (tour sequence, etc.) can automatically be activated on the desired time and date. Up to 128 timer events can be scheduled to activate weekly or on specified dates. Priority setting is also available for each timer event. The timer event setting is performed in "Schedule" - "Timer Event" of WJ-SX650 Series Administrator Console. The following timer events are available. • Spot The image of associated camera will be displayed on the monitor. Preset position or auxiliary control will be activated. • Tour sequence Tour sequence is activated on the associated monitor. • Group sequence/preset Group sequence or group preset is activated on the associated monitor. Time and date settings Time and date will be specified to schedule timer events. The following are setting items. Note: Depending on the display format setting, time and date may be displayed in a different format. Setting item Always Active/ Active Period Designation Parameter Remarks Always Active Timer event is always activated. Active Period Designation (Select the desired dates for "From" and "To".) Period to activate the timer event From Select the desired Timer event is acti- time. vated on the speci- fied time. To Select the desired Priority setting of time. ("From" and this timer event is "To" can be on dif- maintained until the ferent days within specified time. 24 hours.) Schedule Mode Daily Timer event is activated every day. Weekly (Sun to Sat) Timer event is activated every week. Example of timer event setting • To activate Tour Sequence 2 on Monitor 1 on January 1, 19:00 to 20:00 Schedule Mode: Daily Active Period Designation: From Jan/01 to Jan/01 From: 19:00 To: 20:00 Action: Tour Sequence 2 Monitor: 1 • To activate Group Sequence 3 on August 10 to 15, 19:00 to 8:00 of the next day Schedule Mode: Daily Active Period Designation: From Aug/10 to Aug/15 From: 19:00 To: 8:00 Action: Group Sequence 3 Monitor: - (Monitors assigned for Group Sequence 3) Notes: • Timer event will not be activated when monitors are selected by operators with higher priority than the timer event, displaying SETUP MENU, or being in the alarm mode. • Preset position and auxiliary control will not be activated for cameras selected by operators with higher priority or associated with active alarm events. • Spot camera image or sequence display will be continued even after the active period ends. I Camera Event With the camera event setting, camera events (auto tracking, etc.) can automatically be activated on the desired time and date. Up to 128 timer events can be scheduled to activate daily or weekly. The camera event setting is performed in "Schedule" - "Camera Event" of WJ-SX650 Series Administrator Console. The following camera events are available. (Refer to the operating instructions of cameras for details.) G Auto Track • ALARM IN (Camera) - Use Select this setting to activate auto tracking for the ALARM IN 1 to 4 terminals of camera. When the specified terminal accepts an alarm input signal during the specified time, auto tracking is started at Preset Position 1 to 4. (The camera becomes the auto tracking standby mode.) 71