Panasonic WJSX650 WJSX650 User Guide - Page 90

Problem Black bars can be seen on a monitor. Cannot control a camera or receiver. Cannot select a recorder. Cannot control a recorder. 90 Check item and remedy Reference • When the unit is powered on or a camera is connected, black bars may be seen on the monitor for several seconds with images not supporting VD2 (images from recorder or cam- 53 eras of other manufacturers). To eliminate the black bars, set VD2 to OFF. • Check the connection between the camera and the unit. If a receiver is being used, check if the power is supplied to the camera. 27 • Check if the selected camera input channel is not set to accept video input signals from recorder. 50 • Check the level settings or camera access setting. 55 • Check the LCD (or LED) display or indicators of system controller. When "Busy (or the BUSY indicator)" is blinking (or lighting), camera control is not available. 14, 15 Coaxial communication: • Check if the DATA setting of the camera input channel is ON in VD2/DATA/CABLE COMPENSATION of SETUP MENU. 53 • Check if the camera input channel is not set for RS-485 communication in RS485 CAMERA of SETUP MENU. RS-485 communication: • Check if the RS-485 port and unit numbers of camera input channel is set properly in RS485 CAMERA of SETUP 53 MENU. • Check if the LCN is set for the camera input channel accepting video input signals from the recorder. Check the setting in 51 "System" - "Recorder" of WJ-SX650 Series Administrator Console. • Check the connection and settings between the recorder and 30 the unit. • Check the DATA port setting (HDR). 52 • Check the level settings or recorder access setting. 55