Sharp AR-M237 AR-M237 AR-M277 Operation Manual Suite - Page 135

BASIC OPERATIONS TRANSMITTING A TWO-SIDED DOCUMENT The RSPF can be used to automatically fax both sides of two-sided document by memory transmission. 1 Make sure that the machine is in fax mode. SCAN FAX JOB STATUS DATA LINE DATA CUSTOM SE When the [FAX] key light is on, the machine is in fax mode. If the light is not on, press the [FAX] key. 2 Place the original. (p.10) 3 Touch the [ORIGINAL] key. STANDARD RESOLUTION If the address directory screen appears, touch the [CONDITION AUTO 8½x11R ORIGINAL SETTINGS] key to display the condition settings screen (p.7). After touching the [ORIGINAL] key, check the original size displayed in the key. If the original size was not correctly detected, set the correct original size. ("MANUALLY SETTING THE SCANNING SIZE" (p.20)) 4 Touch the [2-SIDED BOOKLET] key or the [2-SIDED TABLET] key as appropriate for the original you loaded. ORIGINAL SIZE AUTO MANUAL 2-SIDED BOOKLET 2-SIDED TABLET 5 Select the [ROTATE THE IMAGE 90 DEGREES] checkbox. MANUAL This step is only necessary if you placed ED 2-SIDED ET TABLET JOB the original so that it is BUILD oriented horizontally (the ROTATE THE IMAGE 90 DEGREES top of the original is on the right or left side). Otherwise, go directly to step 6. 6 Touch the [OK] key. 2 You will return to the SIZE OK initial screen. MANUAL 2-SIDED TABLET JOB BUILD OTATE THE IMAGE 90 DEGREES A two-sided original icon appears next to the [ORIGINAL] key. STANDARD RESOLUTION AUTO 8½x11R ORIGINAL Example: The icon that appears when the [2-SIDED BOOKLET] key is touched. 7 Continue from step 5 of "BASIC PROCEDURE FOR SENDING FAXES" (p.12). ROTATE THE IMAGE Note Booklets and tablets Two-sided originals that are bound at the side are booklets, and two-sided originals that are bound at the top are tablets. Two-sided scanning turns off after the document is stored in memory. Two-sided scanning can be canceled by pressing the [CLEAR ALL] key ( ). Booklet Tablet 17