Sharp AR-M237 AR-M237 AR-M277 Operation Manual Suite - Page 75
Staple Cartridge Replacement
View all Sharp AR-M237 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
STAPLE CARTRIDGE REPLACEMENT (when the finisher (AR-FN5N) is installed) When the message "ADD STAPLES." appears, replace the staple cartridge as follows: 1 Open the stapler cover. 5 Remove the tape from the cartridge. 2 Grasp the green portion of the staple box and remove the staple box from the stapler. 6 Insert the staple box into the stapler unit until it clicks into place. 7 Close the stapler cover. 3 Remove the staple cartridge from inside the staple box. 5 4 Insert the new staple cartridge into the box until it clicks into place. Insert the new cartridge by aligning the arrows on the cartridge with those on the box. Check that the cartridge has locked into place by pulling it slightly. 73
73
5
STAPLE CARTRIDGE REPLACEMENT
(when the finisher (AR-FN5N) is installed)
When the message "ADD STAPLES." appears, replace the staple cartridge as follows:
1
Open the stapler cover.
2
Grasp the green portion of the staple
box and remove the staple box from
the stapler.
3
Remove the staple cartridge from
inside the staple box.
4
Insert the new staple cartridge into the
box until it clicks into place.
Insert the new cartridge
by aligning the arrows on
the cartridge with those
on the box.
Check that the cartridge
has locked into place by
pulling it slightly.
5
Remove the tape from the cartridge.
6
Insert the staple box into the stapler
unit until it clicks into place.
7
Close the stapler cover.