Sharp AR-M237 AR-M237 AR-M277 Operation Manual Suite - Page 221

KEY OPERATOR PROGRAMS F-CODE MEMORY BOX This program is used to program memory boxes for F-code communication. Three types of memory boxes can be programmed: F-code memory polling boxes, F-code confidential boxes, and F-code relay broadcast boxes. Follow the procedure below to program, edit, or delete a memory box. Programming an F-code memory box A box name, sub-address, password, and specific functions are programmed in a memory box. Note • When programming a memory box, the same sub-address as a previously programmed memory box cannot be used. However, the same passcode can be used. • A passcode can be omitted. • Up to 10 F-code memory boxes can be programmed. If you attempt to program a memory box when 10 boxes have already been programmed, a warning message will appear and programming will not be possible. Delete any unneeded F-code memory boxes (p.105) and then program the new box. 1 Touch the desired type of memory box ([POLLING MEMORY], [CONFIDENTIAL], or [RELAY BROADCAST]) in the upper row of keys. KEY OPERATOR PROGRAMS F-CODE MEMORY BOX OK STORE POLLING MEMORY CONFIDENTIAL RELAY BROADCAST AMEND/DELETE POLLING MEMORY CONFIDENTIAL RELAY BROADCAST (The following uses [POLLING MEMORY] as an example.) The F-code memory box programming screen appears. 2 Touch the [BOX NAME] key. • The lowest box number that has not yet been programmed will automatically appear in "No.". • The character entry screen appears. Enter a name for the box (maximum of 36 characters). • To enter characters, see "ENTERING CHARACTERS" on page 80. 3 Touch the [OK] key. 4 Touch the [SUB ADDRESS] key. The sub-address/passcode entry screen appears. 5 Use the numeric keys to enter a sub-address (maximum of 20 digits). • The characters and # cannot be used in a sub-address. • If you make a mistake, press the [CLEAR] key ( ) and then enter the correct number. • If you do not wish to enter a passcode after entering the sub-address, go directly to step 8. 6 To enter a passcode, touch the [PASS CODE] key. A slash (/) appears after the sub-address. If you make a mistake, press the [CLEAR] key ( then enter the correct number. ) and 7 Use the numeric keys to enter a passcode (maximum of 20 digits). • Numbers and " " and "#" can be used in a passcode. • If you make a mistake, press the [CLEAR] key ( ) and then enter the correct number. 8 Touch the [OK] key. You will return to the memory box programming screen. The entered sub-address and passcode will appear. "REGISTRATION IS COMPLETED." will appear next to the box "No.". 9 Touch the [NEXT] key or the [EXIT] key. • To program another memory box, touch the [NEXT] key. • To exit, touch the [EXIT] key. Next, program specific functions of the memory box as indicated below: • F-code confidential box (print passcode: page 104) • F-code relay broadcast box (end receiving machines: page 104) 8 103