Sharp AR-M237 AR-M237 AR-M277 Operation Manual Suite - Page 39

CONVENIENT COPY FUNCTIONS STAPLE SORT (when the finisher (AR-FN5N) is installed) This function collates the copies, staples each set, and delivers the sets to the offset tray. The staple sort function can only be used when a finisher is installed. Stapling position Top left corner Portrait orientation Available paper sizes: 8-1/2" x 11" (A4 and B5) Stapling capacity: For each size, up to 30 sheets can be stapled. Landscape orientation Available paper sizes: 11" x 17", 8-1/2" x 14", 8-1/2" x 13", 8-1/2" x 11" R, (A3, B4 and A4R) Stapling capacity: For each size, up to 30 sheets can be stapled. ORIENTATION OF THE ORIGINAL AND STAPLING POSITIONS If the orientation of the originals does not match that of the copy paper, the images will be rotated. The stapling position varies with the orientation of the original. 3 Using the RSPF Using the document glass Insert the originals face up. Place each original face down. Stapling position Stapling position When copying 8-1/2" x 14" or 11" x 17" (B4 or A3) vertically oriented originals, the copies will be stapled at the position shown below. Stapling position Stapling position SHARP RSPF Document glass • When using letterhead paper in the staple sort, load the paper with the letterhead to Note the front or to the right as shown in the diagram. SHARP • Different sized originals cannot be copied on the corresponding sizes of paper. • The staple sort function cannot be used if disabled in the key operator programs. (See the "Key operator's guide".) • The offset function (p.35) cannot be used. 37