Sharp AR-M237 AR-M237 AR-M277 Operation Manual Suite - Page 148

AUTOMATIC TRANSMISSION AT A SPECIFIED TIME (TIMER TRANSMISSION) This feature enables you to set up a transmission or polling operation to be performed automatically at a specified time. The time can be specified up to a week in advance. This allows you to take advantage of off-peak phone rates without having to be there when the transmission is performed. A combined total of 50 timer transmission and memory transmission jobs can be stored. Note • After a timer transmission is performed, the information (resolution setting, destination, etc.) is automatically cleared from memory. • To perform a timer transmission, the document must be scanned into memory. It is not possible to place the document in the RSPF or on the document glass and have it scanned at the specified time of transmission. • To set the date and time in the machine, refer to "CUSTOM SETTINGS" of operation manual for copier. You can check the machine's current time in the screens of steps 3 and 4. • Only one polling timer operation can be set up at a time. If you wish to set up multiple timer polling operations, combine the machines to be polled into a serial polling operation with a timer setting. (p.32) SETTING UP A TIMER TRANSMISSION 1 In fax mode, touch the [SPECIAL MODES] key. AUTO RECEPTION SPECIAL MODES DIRECT TX BO SUB ADD ADDRESS MEMOR If the address book screen appears, touch the [CONDITION SETTINGS] key to display the condition settings screen. (p.7) 2 Touch the [TIMER] key. SPECIAL MODES The timer transmission screen appears. TIMER 3 Select the day of the week. (Touch the key or the key until the desired day is selected.) DAY OF THE WEEK The initial factory setting is "---" (no selection). If you select this setting, the transmission will be performed as soon as the specified time arrives. 4 Select the time. (Touch the key or the key until the desired time appears.) TIME 01 HH. CANCEL 30 mm. Select the time in 12-hour format. If you continue touching the keys, the numbers will change quickly. Touch the [AM] or [PM] key to select AM or PM. The current time appears at the top of the screen. If the current time is not correct, press the [CLEAR ALL] key ( ) to cancel the operation. Correct the date and time setting as explained in "CUSTOM SETTINGS" in operation manual for copier. 5 Touch the outer [OK] key. 9:43 AM CANCEL 30 mm. You will return to the OK screen in step 1. A timer icon will appear in the OK touch panel. To cancel the timer transmission, touch the [CANCEL] key. 30