Sharp AR-M237 AR-M237 AR-M277 Operation Manual Suite - Page 68
MISFEED IN THE BYPASS TRAY, MISFEED IN THE MACHINE, A. Misfeed in the paper feed area - drum unit
View all Sharp AR-M237 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
TROUBLESHOOTING AND MAINTENANCE MISFEED IN THE BYPASS TRAY 1 Carefully pull the misfed paper out. 2 Open and close the side cover. Make sure that the misfeed message is cleared. The message can also be cleared by opening and closing the front cover. If the message is not cleared, see "A. Misfeed in the paper feed area". MISFEED IN THE MACHINE Determine the location of the misfeed and remove it appropriately as indicated below. If paper is misfed, go to "B. Misfeed in the fusing area" (p.67). If paper is misfed here, go to "A. Misfeed in the paper feed area" (below). A. Misfeed in the paper feed area 1 Open the bypass tray and the side cover. 3 Carefully remove the misfed paper. Turn the roller rotating knob in the direction of the arrow to assist in removing it. Roller rotating knob Be careful not to tear the misfed paper during removal. 2 Press gently on both sides of the front cover and pull it open. 66 Warning The fusing unit is hot. Do not touch the fusing unit when removing misfed paper. Doing so may cause a burn or injury. Caution Do not touch the photoconductive drum (green portion) when removing the misfed paper. Doing so may damage the drum and cause smudges on copies.