Sharp AR-M237 AR-M237 AR-M277 Operation Manual Suite - Page 72
Misfeed In The Upper Exit Area, Misfeed In An Output Tray - maintenance kit
View all Sharp AR-M237 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
TROUBLESHOOTING AND MAINTENANCE MISFEED IN THE UPPER EXIT AREA (when a job separator tray kit or finisher (AR-FN5N) is installed) If a job separator tray kit or a finisher is installed, a misfeed may occur in the upper exit area. 1 Open the upper right side cover. 3 Close the upper right side cover. Make sure that the misfeed message is cleared. 2 Gently pull the misfed paper out. Be careful not to tear the misfed paper during removal. MISFEED IN AN OUTPUT TRAY (when a finisher (AR-FN5N) is installed) A MISFEED HAS OCCURRED. INFORMATION 1 Grasp the handle of the stapler compiler cover and pull to open the cover. 2 Remove any misfed paper from the transport area. 70
70
TROUBLESHOOTING AND MAINTENANCE
MISFEED IN THE UPPER EXIT AREA
(
when a
job separator tray kit or finisher (AR-FN5N) is installed
)
If a job separator tray kit or a finisher is installed, a misfeed may occur in the upper exit area.
1
Open the upper right side cover.
2
Gently pull the misfed paper out.
Be careful not to tear the
misfed paper during
removal.
3
Close the upper right side cover.
Make sure that the misfeed message is cleared.
MISFEED IN AN OUTPUT TRAY
(when a finisher (AR-FN5N) is installed)
1
Grasp the handle of the stapler
compiler cover and pull to open the
cover.
2
Remove any misfed paper from the
transport area.
A MISFEED HAS OCCURRED.
INFORMATION