Sharp AR-M237 AR-M237 AR-M277 Operation Manual Suite - Page 76
Checking The Toner Quantity, And Total Output Count
View all Sharp AR-M237 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
TROUBLESHOOTING AND MAINTENANCE STAPLE JAM REMOVAL If staples become jammed in the stapler, the message "CHECK STAPLER POSITION OR STAPLE JAM." will appear. Follow these steps to remove the jammed staples. 1 Open the stapler cover. 4 Return the lever to its original position. 2 Grasp the green portion of the staple box and remove the staple box from the stapler. 5 Insert the staple box into the stapler unit until it clicks into place. 3 Raise the lever at the end of the staple box and remove the jammed staples. 6 Close the stapler cover. CHECKING THE TONER QUANTITY AND TOTAL OUTPUT COUNT The approximate quantity of toner remaining and the total output count can be displayed as explained below. G The output count shows the combined output total of the copy, fax, and printer functions. Checking the total output count and toner quantity Hold down the [COPY] key. The total output count and toner quantity appear while the key is held down. Note 74 TOTAL OUTPUT : 0,123,456 TONER QUANTITY : 100-75% SPECIAL MODES COPY 2-SIDED COPY OUTPUT 8½x11 8½x14 PRINT • Each 11" x 17" (A3) page is counted as two pages. Two sided pages are also counted as two pages. • The amount of toner consumed will vary depending on conditions of usage and the type of originals copied. The toner quantity display should only be used as an approximate guide.