Toshiba Satellite Pro 4300 User Manual - Page 102

PCI bus, PC Card, PC Card Controller Mode

Page 102 highlights

When the Parallel Port Mode (see settings below) is set to ECP, the DMA channel can also be set to 1 or 3. The default is 3. LPT setting LPT 1 LPT 2 LPT 3 Not Used Others I/O address 378H 278H 3BCH Interrupt level DMA Channel 7 3 (Default) 5 3 7 3 (Disables port) (Other settings made automatically by plug-and-play operating systems) PCI bus It is for information only and cannot be changed. It appears only in TSETUP. PCI BUS = IRQ** (Interrupt level is displayed.) PC Card This option lets you set the PC Card Controller mode. PC Card Controller Mode This option lets you set the PC Card Controller mode. Auto-Selected Use this setting for all PC Cards if you are using a plug-and-play operating system. (Default) CardBus/16bit If the card does not work properly with the AutoSelected setting, use this setting for CardBus PC Cards. PCIC Compatible If the card does not work properly with the AutoSelected and CardBus/16bit settings, use this setting for 16-bit PC Cards. When Device Config is set to Setup by OS, you must set the PC Card to Auto-Selected. 7-14 Setup and Password Security User's Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230

7-14
Setup and Password Security
User's Manual
When the Parallel Port Mode (see settings below) is set to ECP, the DMA
channel can also be set to 1 or 3. The default is 3.
LPT setting
I/O address
Interrupt level
DMA Channel
LPT 1
378H
7
3
(Default)
LPT 2
278H
5
3
LPT 3
3BCH
7
3
Not Used
(Disables port)
Others
(Other settings made automatically by
plug-and-play operating systems)
PCI bus
It is for information only and cannot be changed. It appears only in TSETUP.
PCI BUS
=
IRQ**
(Interrupt level is displayed.)
PC Card
This option lets you set the PC Card Controller mode.
PC Card Controller Mode
This option lets you set the PC Card Controller mode.
Auto-Selected
Use this setting for all PC Cards if you are using
a plug-and-play operating system. (Default)
CardBus/16bit
If the card does not work properly with the Auto-
Selected setting, use this setting for CardBus PC
Cards.
PCIC Compatible
If the card does not work properly with the Auto-
Selected and CardBus/16bit settings, use this
setting for 16-bit PC Cards.
When Device Config is set to Setup by OS, you must set the PC Card to
Auto-Selected.