Toshiba Satellite Pro 4300 User Manual - Page 171

Floppy disk (Diskette test) After the last graphics display test, the program displays the following prompt: FLOPPY DISK 503000 Mount the work disk(s) on the drive(s), then press [Enter] key [Warning : The contents of the disk(s) will be destroyed] If diskette drives are connected, this prompt asks you to insert a diskette into each diskette drive you want to test. The diskettes you insert should contain no important information because the test destroys all data on the diskette. The diskettes must be write enabled. For 3 ½" diskettes, the write-protect tab must be closed so you cannot see through it. These disks must also be formatted Press Enter when you've inserted the disk(s) in the drive(s). The test begins and displays: FLOPPY DISK TEST IN PROGRESS 503000 If there is an error, the ABORTED message appears. Write down the highlighted numbers and press Ctrl + Break to return to the DIAGNOSTICS MENU. If a disk drive fails, check the following: Disks are properly formatted. Disks are not damaged. Try another disk and if there is still a problem, consult your dealer. If you change your mind and decide not to test a disk, press Ctrl + Break to return to the DIAGNOSTICS MENU. Hard disk test If the diskette test passes, and you selected to test the hard disk, you see the following message: HARD DISK TEST IN PROGRESS 805000 If this test aborts, write down any messages and consult your dealer. The computer or the drive may require service. Press Enter to return to the DIAGNOSTICS MENU. User's Manual Troubleshooting 9-23