Toshiba Satellite Pro 4300 User Manual - Page 157
Problem, Procedure, Audio CD, Photo CD, ISO 9660
View all Toshiba Satellite Pro 4300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 157 highlights
DVD-ROM drive For more information, refer to Chapter 4, Operating Basics. Problem You cannot access a DVD in the drive Some DVD/CDs run correctly, but others do not Procedure Make sure the drive's drawer is securely closed. Press gently until it clicks into place. Open the drawer and make sure the DVD is properly seated. It should lie flat with the label facing up. A foreign object in the drawer could block laser light from reading the DVD. Make sure there is no obstruction. Remove any foreign object. Check whether the DVD is dirty. If it is, wipe it with a clean cloth dipped in water or a neutral cleaner. See the Disk care section in Chapter 4, Operating Basics, for details on cleaning. The software or hardware configuration may be causing a problem. Make sure the hardware configuration matches your software's needs. Check the DVD/CD's documentation. Check the type of DVD/CD you are using. The drive supports: DVD-ROM: DVD-ROM, DVD-Video CD-ROM: Audio CD, Photo CD, ISO 9660, CD-EXTRA, CD-R (read only), CD-Rewritable (read only) Check the region code on the DVD. It must match that on the DVD drive. Region codes are listed in the DVD-ROM drive section in Chapter 2, The Grand Tour. If problems persist, contact your dealer. User's Manual Troubleshooting 9-9