Toshiba Satellite Pro 4300 User Manual - Page 132
Connecting to the Card Station III, Connecting the computer with spacer to the Card Station III
View all Toshiba Satellite Pro 4300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 132 highlights
Connecting to the Card Station III Connection of the Card Station III requires a spacer. You can connect the spacer by itself to either the Card Station III or to the computer. You can also either prevent or enable disconnection of the computer from the spacer while the spacer remains connected to the Card Station III. This section describes two ways of connecting to the Card Station III: 1. Computer with spacer 2. Spacer alone Connecting the computer with spacer to the Card Station III This section describes connection of the spacer to the computer, then connection of the computer with spacer to the Card Station III. The unlock status lets you remove the computer from the spacer without removing the spacer from the Card Station III. 1. Remove the rubber cover from the computer's Docking Interface port, and set the computer lock on the bottom of the spacer to the unlock position. 2. Seat the computer between the spacer guide rails and push the computer forward to secure it on the spacer. Connecting the computer to the spacer 3. Connect the spacer with computer to the Card Station III as described in the next section. 8-20 Optional Devices User's Manual