Toshiba Satellite Pro 4300 User Manual - Page 95
Hard Disk Mode, USB Legacy Emulation, Parallel Port Mode
View all Toshiba Satellite Pro 4300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
USB Legacy Emulation Use this option to enable or disable USB Legacy Emulation. If your operating system does not support USB, you can still use a USB mouse and keyboard by setting the USB Legacy Emulation item in TSETUP to Enabled. USB Legacy Emulation = Disabled (Default) = Enabled Parallel Port Mode This tab lets you set the Printer Port type. Use the Windows Device Manager to make settings for the Parallel port. Printer Port Type The options in this tab are ECP and Standard Bi-directional. ECP Sets the port type to Extended Capabilities Port (ECP). For most printers, the port should be set to ECP. (Default) Standard Bi-directional This setting should be used with some other parallel devices. Hard Disk Mode Use this item to select the hard disk mode. The hard disk mode can be set only in TSETUP. Formats for Enhanced IDE and Standard IDE are different, so if you change the setting, you will have to reformat the hard disk for the appropriate setting. Enhanced IDE (Normal) Standard IDE Select this mode when using MS-DOS, Windows 95/98 or Windows NT. (Default) Select this mode when using an operating system that does not support Enhanced IDE. If this mode is selected with MS-DOS, up to 504 MB is logically available even though the disk's capacity is larger than 504 MB. User's Manual Setup and Password Security 7-7