Toshiba Satellite Pro 4300 User Manual - Page 117
Installing memory module, Slide your fingernail or a thin object under the cover and lift it off.
View all Toshiba Satellite Pro 4300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
Installing memory module Follow the steps below to install a memory module. 1. Set the computer to boot mode and turn off the power. Do not try to install a memory module with the computer turned on. You can damage the computer and the device. 2. Remove all cables connected to the computer. 3. Turn the computer upside down and remove the battery (refer to Chapter 6, Power and Power-Up Modes). 4. Remove two screws securing the memory module socket cover. 5. Slide your fingernail or a thin object under the cover and lift it off. Removing the memory module socket cover 6. Fit the module's connectors into the computer's connectors at about a 45 degree angle and press the module carefully to ensure a firm connection. Do not touch the connectors on the memory module or on the computer. Debris on the connectors may cause memory access problems. User's Manual Optional Devices 8-5