Xerox 6180N DocuTech 61xx - Operator HandyBook - Page 102
Clear the Entire Paper Path From the Paper Trays to the Finisher, Clear the Fault in the Printer
UPC - 095205425307
View all Xerox 6180N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
Solutions in Alphabetical Order 9. Locate the handle on the left side of the Binder and pull it up quickly to snip off the tape that you advanced. Press the green handle down. 10. Push the Binder into the Finisher until it latches. 11. Close the Finisher Doors. 12. Close the Finisher Top Cover. Clear the Entire Paper Path From the Paper Trays to the Finisher You should inspect the entire paper path from the paper trays to the Finisher to make sure there are no paper jams in any of the areas. Make sure to look for small pieces of paper that may have torn off during previous attempts to clear jams. Clear the Fault in the Printer Fault Clearance Window Clearing a fault using DocuSP software version 3.x or above: 1. From the DocuSP for DocuTech 2000 Series 61xx (or your printer model) window, select the fault from the Fault List that you want to clear. The Fault List is located in the upper right corner just below the word System. The Printer Fault Clearance window will be displayed for the fault you selected. 2. Follow the given clearance instructions in the Printer Fault Clearance window. NOTE: You can select [Close] to close the Printer Fault window without clearing the fault. However, the fault will remain until it is reset through the Printer Fault Clearance window. 3. Select [Close] when you have completed your work in the Printer Faults Clearance window. Clearing a fault using DocuSP software version 2.x or below: 1. From the DocuSP Print Services window, there will be an icon with a picture of a wrench and a red lightning bolt displayed, if there is a fault. 2. Select the [Wrench] icon to open the Printer Faults window. 3. In the Printer Fault window, select the fault to display the instructions for clearance. 4. Follow the given clearance instructions in the Printer Fault Clearance window. DT6180 HandyBook 102