Xerox 6180N DocuTech 61xx - Operator HandyBook - Page 105
Some machines will have a large silver colored transport under the top cover, approximately
UPC - 095205425307
View all Xerox 6180N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
Solutions in Alphabetical Order 7. Grasp the handle and rotate it to the left. 8. Remove any paper in this area. 9. Rotate the handle to the right, to the latched position. If the handle does not stay in position when released, it is not latched properly. To clear areas 17 and 18: 10. Open the Finisher Top Cover by lifting the handle to release the cover. Push the cover open all the way. 11. Some machines will have a large silver colored transport under the top cover, approximately the same size as the top cover. If so, there is a handle to raise the transport with. The handle is a black rod with a silver spring on each side and is located on the very front of the transport. 12. Lift the transport and manually hold it in place while paper jams are being cleared. 13. Remove any paper in the right center area of the Finisher, under the Finisher Top Cover, or silver transport area. DT6180 HandyBook 105